TC-5953A

    W-LAN Shield Box 

TC-5953A W-LAN Shield Box is a pneumatic control RF test fixture that provides RF isolation and reliable signal connections necessary for testing of Cardbus and Mini-PCI Wireless LAN devices in a test system. With the extensive list of standard accessories, TC-5953A offers an excellent value for the test needs of production line, R&D, service and QA. TC-5953A W-LAN Shield Box provides an efficient RF Isolated test environment for wireless LAN.

• High RF shielding

• Pneumatic control for manual or semi-automatic operation
• IEEE 802.11a/b/g
• Applicable to CardBus/PCMCIA, mini PCI, USB, or LAN devices.
• Built-in Bridge for reliable data cable extension
• Built-in Hot Swap Capability for mini PCI device
• Banana Jack for using external DC power
• EMI filters on all data lines
• Safety protective cover
• RS-232C open-close control
• Customization to meet various data and RF connecting requirements
• Easy-to-exchange customized fixtures
• Red and Green LED for the Pass/Fail indication
• Lid Operation Sensing System for safety
• CE compliant: EN 292-1:1991, EN 292-2:1991/A1:1995, EN 983:1996, EN 1050:1996, EN 60204-1:1997

•  Target devices. Wireless LAN and similar devices.

•  Customizable signal connections: Device control data, RF probe signal 

• Long Life. Typically 1,000,000 open/close cycle

• Ability to control lid opening and closing speed
• Lid opens when the compressed air is connected or power is turned on
• Built-in electronics open/close counter, able to read the number of times by control PC
• If Lid sensor detects an error that the Lid is not closed completely, the Lid will move back to open immediately

Typically, every device has a unique outline and connection configuration requiring unique handler and fixture customization to move DUT in and out of the cell and make data/RF connections, and to move probe pins or connectors up and down for signal probing.
 

Shielding effectiveness:           > 55 dB, 2.4GHz including connectors
                                              > 50 dB, 5.8GHz, including connectors 
RF Connectors: Two Type N outside, Two SMA inside
Data I/O connectors: 100pin Shielded Flat Cable, RJ-45, USB adaptor cable
Remote control : RS-232C, 3 wire, DB9 type 
Compressed air requirement: 5 bar to 10 bar
Compressed air connector: Sang-A PMM06, 6 mm (0.23") push on fitting
Air connector between fixture and main body: 4 mm (0.15") push on fitting
Line voltage: 100 to 240 volt AC, 50/60 Hz, 16 watt
Working space: 280(W) x 150(D) x 95(H) mm {11.02"(W) x 5.90"(D) x 3.74"(H)}
Dimension : 342(W) x 239(D) x 262(H) mm {13.46"(W) x 9.41"(D) x 10.31"(H)}, close state. 410(H) mm (16.14"), open state
Weight without fixture : 14 kg (30.86lbs)
Standard Accessories Supplied :

Operating Manual, Power Cable, Hand Valve, Lid Stopper, Safety Shield
RS-232C Cable, 1pc.
DB9 Data Cable, 1pc.
NP-SMAP RF Cable, 2pcs.
USB Adaptor Cables: 2pcs, 1m (39.37") and 15cm (5.90")
RJ-45 Adaptor Cables 2pcs, 1.5m (59.05") and 30cm (11.81")
CBC S/W Driver (1x 3.5¡± diskette)
99120A, PCI to 100pin Adaptor, for right side motherboard, 1pc.
99120B, PCI to 100pin Adaptor, for left side motherboard, 1pc.
99110B, 100pin to CardBus Adaptor, 1pc.
99117E, 100pin to mini PCI Adaptor, 1pc.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE